Engraved nameplates for equipment
Two-color engraved nameplates for electrical and mechanical equipment, built to the size and letter height in your spec.
Start from a transformer nameplate and change the size and wording to your spec.
Make a nameplateBuilt to your spec
Enter the plate size and the cap height your spec calls for, and the builder shows exactly how the plate will look at that size. If the letters won't fit, it tells you the largest height that does.
- Transformers, switchboards, panelboards and motor control centers
- Control panels, VFDs, pumps and motors
- Machines, valves, rooms and doors
"Phenolic" nameplates
Many specs still say phenolic. We use two-layer laser-engravable plastic: a colored face with a contrasting core, the same look buyers expect, with clean square edges. If your spec requires a specific material, check that engraved plastic is acceptable before you order.
Sizes and prices
| Size (H × L) | Typical use | Each | Each, 10+ |
|---|---|---|---|
| 1" × 3" | Small device or valve | $4.96 | $3.76 |
| 2" × 4" | Panel or transformer | $8.06 | $6.61 |
| 2" × 6" | Switchgear section | $10.54 | $8.89 |
| 3" × 6" | Large equipment | $14.26 | $12.31 |
Plus a $13.00 order fee per order and 8.6% Ellensburg sales tax. Any custom size from 1/2" up to 12" × 24" works; the builder prices it as you type.
Colors and mounting
White on black, black on white, white on red, black on yellow, white on blue, white on green and white on orange. Adhesive back, two screw holes, or four corner holes.
What to send
- The exact wording, one line per row, spelled the way you want it engraved.
- The size, in inches or millimeters, and the letter height if your spec calls for one.
- Color, material, and adhesive back or screw holes.
Start from a transformer nameplate and change the size and wording to your spec.
Make a nameplate