Engraved solar PV labels
Rapid shutdown signs, disconnect labels and power source directories for PV and battery systems, engraved in UV-stable plastic or metal.
Start from a rapid shutdown sign and set the wording your inspector requires.
Make a solar labelLabels a PV system commonly needs
- Rapid shutdown sign at the service equipment (NEC 690.56(C)).
- PV system disconnect labels (NEC 690.13(B)).
- Backfed breaker warning: POWER SOURCE OUTPUT CONNECTION — DO NOT RELOCATE THIS OVERCURRENT DEVICE (NEC 705.12).
- Power source directory showing every source and where its disconnect is (NEC 705.10), or a multiple power sources caution sign pointing to it.
- Battery and energy storage system labels.
Which labels you need, and their exact wording, colors and letter sizes, depend on your system and on the NEC edition your inspector enforces. We engrave the wording you send; check it against the code and your AHJ before you pay. The builder shows letter height in inches so you can match a required minimum.
Made for outside
Our standard two-layer plastic is UV-stable for outdoor use. For harsh spots, choose anodized aluminum or stainless steel.
Sizes and prices
| Size (H × L) | Typical use | Each | Each, 10+ |
|---|---|---|---|
| 1.5" × 4" | PV disconnect | $6.82 | $5.47 |
| 2" × 4" | Backfed breaker warning | $8.06 | $6.61 |
| 3" × 6" | Rapid shutdown sign | $14.26 | $12.31 |
| 6" × 8" | Power source directory | $32.86 | $29.41 |
Plus a $13.00 order fee per order and 8.6% Ellensburg sales tax. Any custom size from 1/2" up to 12" × 24" works; the builder prices it as you type.
Start from a rapid shutdown sign and set the wording your inspector requires.
Make a solar label